Fully Automatic Extrusion Machine (JMX90D)

Product Description

The JMX90D (max produce 20L) double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of JMX45D, JMX50D, JMX60D, JMX70D, JMX90D. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 10L, and its production capacity is 60 % more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production. The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.

Setting:
Clamping--Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system--Japan PLC+Imported HMI+PLC automatic

Parameters
Specifications	unit	JMX901D
Material		PP,LDPE,HDPE….
Max container capacity	L	2X20L
Number of die	set	1
Output(dry Cycle)	pc/hr	500X2
Actual output	pc/hr	120pcs/20L
Machine Dimension(L×W×H)	M	4.5x2.8x3.5
Total weigh	ton	14.5
Clamping Unit		JMX901D
Clamping force	KN	145
Platen opening stroke	mm	300-750
Platen size	mm	500X650
Max mould size(W×H)	mm	550X550
Mould thickness	mm	330-430
Power		JMX901D
Max drive	KW	75
Total power	KW	115
Fan power for screw	KW	0.54
Air pressure	Mpa	0.7
Air consumption	m³/min	0.8
Average energy consumption	KW	33.5
Extruder unit		JMX901D
Screw diameter	mm	90
Screw L/D ratio	L/D	25
Plasticising capacity	Kg/hr	140
Number of  heating zone	zone	5
Extruder  heating  power	KW	25
Extruder driving power	KW	45
Rotate speed of screw	rev / min	9-87
Drive Form		transducing speed
Speed-down Box		Alloy steel gear
Screw barrel material		38CrMoAlA(High quality steel)
Screw bolt head		plating horniness alloy steel
heater		Casting Aluminium heater
Die		JMX901D
Number of  heating zone	zone	4~6
Power of die heating	KW	12.6
Max die-pin diameter	mm	240
(MOOG)Thickness reference point	moog	30
Diehead structure		Storing material jar
flowing form		First by first element
mainly forming part material		38CrMoAlA;42CrMo
Hydraulic Pressure		JMX901D
Extruder driving power	Kw	30
rated pressure	Mpa	14
Vertical travel		JMX901D
Table vertical stroke	mm	390
Lift speed	mm/min	30
Power supply		JMX901D
Voltage	V	380/50HZ
Voltage wave range	%	±5