Automatic Bottle Blow Molding Machine (JMX75D)

Automatic Extruding Plastic Blow Molding Machine/One Stage Blow Moulding Machine/PE Blow Molding Machine/Automtaic Vacuum Shape Blowing Machine/Hollow-Plastic Blow Molding Machine/HDPE Blow Moulding Machine/Plastic Bottle Moulding Machine/One stage with 1station Moulding Machine

The JMX75D(max produce 8L) double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of JMX45D, JMX55D, JMX65D, JMX75D, JMX80D. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 10L, and its production capacity is 60 % more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production. The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.

Setting:
Clamping--Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system--Japan PLC+Imported HMI+PLC automatic

I. Main technical data
Applied material: HDPE, PP, PE, PVC, etc.
Production capacity: 8L(max)
Output: 700*2 PCS/hour

II. Extruding system
Screw type: Same distance, different depth, gradual change
Screw diameter: 75mm
Screw L/D: 24/1
Extruding volume: 110-130kg/hour
Material: 38CrMoALA treated with N
Screw rigidity: HV700-840,
Screw brittleness: <=2 degree
Barrel material: 38CrMoALA treated with N
Barrel rigidity: HV>=940
Barrel brittleness: <=2 degree
Driving way: Invert motor and hard-teeth face gear box
Extruding heating power: 7-8 kw
Extruder driving power: 25-30kw
Number of heating zone: 3zone

III. Accumulator head
Whole structure: Convenient
Number of die heating: 3 zone
Power of die heating: 6 kw
Max die-pin diameter: 150mm
Center distance of twin-die: 160 mm
Center distance of tri-die: 110mm
Center distance of four-die: 90mm electronic parts air control system