Blow Plastic Machine/Blow Moulding Machine/Blow Cans Machine/Blow Bottle Machine/Full Automatic Extruder Blow Molding Machine/Plastic Bottle Making Machine
The JMX55D(max produce 3.5liter) double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of JMX45D, JMX55D, JMX65D, JMX75D, JMX80D. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA.
The largest capacity of the product can be 10L, and its production capacity is 60 % more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production. The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
I.Main technical data
Applied material: HDPE, PP, PE, PVC, etc.
Production capacity: 3.5L(max)
Total consumption: 30kw/hr.
II.Extruding system
Screw type: same distance, different depth, gradual change
Screw diameter: 55mm
Screw L/D: 24/1
Material: 38CrMoALA treated with N
Screw rigidity: HV700-840,
Screw brittleness: <=2 degree
Barrel material: 38CrMoALA treated with N
Barrel rigidity : HV>=940
Barrel brittleness: <=2 degree
Driving way: invert motor and hard-teeth face gear box
driving power: 15kw
rotate speed: 10-80 rpm
plastisizing ability: 45kg/hr.
arrangement of temp. control: ±0.5degree
heating zones: 2
cooling way: blowing
blower number: 2
III. Head of mould
Heating way: loop made in STS
arrangement of temp. control:±1ºC
Center distance of die head:45mm
Max.die-pin diameter:55mm
heating power: 3.6kw
heating zones: 2
mould material: treated with N, P, Cr
temp. control: TAIWAN YANHUA PID
core and convention of mould: a set with machine, if adding it should be paid more.
IV.Close structure
Type: double axes, single oil jar, double way, synchronization, opening and closing speed is fast, but smoothly.
Power of pressing the mould: 38KN
Leakage in two side of mould: 130-370mm
Mould thickness arrangement: 135-210mm
Max size of mould(L*H): 350*360mm
V.Machine size:
2.9*2.1*2.5m
VI.Blow structure
Single blowing, three direction, convenient, it can protect exit of mould.
VII.Hydraulic system
Little noise, power cost low, smoothly, long life.
VIII.Character of control system
Automatic, high speed, controlled by computer.
IX.Power requirement
Compress air:0.6 bar,
Total power:36.3kw
Average power consumption:22kw
Cooling water pressure:3 bar
Cooling water consumption:2.5/4 m3/Hr
| Name |
Trader |
| Oil pump |
TAIWAN BUXIN |
| Valve |
TAIWAN JIUGANG |
| Oil pump and connection |
TAIWAN |
| Sealed part |
TAIWAN |
electronic parts
| Name |
Trader |
| Micro computer control system |
Japanese MITSUBISHI PLC+inductive screen |
| |
Inductive screen: HITECH Electronics |
| Tem' control part |
TAIWAN YANHUA PID |
| Replay |
OMRON company |
| contacting |
South Korean LG |
| Air switch |
South Korean LG |
| Electric motor |
Three and asynchronism motor |
| Power |
TAIWAN MEANWELL |
| Transducer |
South Korean LG |
air control system
| Name |
Trader |
| Electromagnetism valve |
AIRTAC |
Audited Supplier 
){kind=link}