Hollow Plastic Blow Molding Full Automatic Double Extrusion Machine (JMX45D)

• Customization: Available
• Type: Extrusion Blow Molding Machine
• Raw Material: PE
• Model NO.: JMX45D
• Automation: Automatic
• Computerized: Computerized
• Material: SUS304/SUS316L
• After Sale Service: Engineers Available to Service Overseas
• Capacity: Depends on Product
• Warranty: 12months
• Hydraulic Pump: Adopt Double-Lamina Pump
• Vitta: High Pressurevitta
• Cooling Mode: Water-Cooled
• Valve: Festo
• Cycle Time: 300PCS
• Water Flux: 60L/Min
• Transport Package: Film with Steel Frame
• Specification: ISO9000: 9001; CE
• Trademark: King Machine
• Origin: China
• HS Code: 84773000
• Production Capacity: 10sets/Month

Product Description

Product Description

Automatic Plastic bottle Blow Molding Machine extrusion blow moulding machine

Bggest factory for blow molding machine in China, we have already exported to over 60 countries in the world, like  America, England, Sri Lanka, Italy Switzerland, Newzealand, Egypt.etc. 

Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.

A.Brief Introduction
fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc. 
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
 
B.Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand 

C.Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent. 

Basic parameter	Material	PE.PP...
	Max.product volume	5L
	Cycle time	300pcs
	Measurement	LXWXH=3.5x2.2x2.8 (meter)
	Weight	6T
	General power	33.9KW
	Average power consumption	22KW/H (The is the exactly power consumption)
Plasticizing system	Specification	extrusion system can be applicable to various of raw material, plasticizing capability is good and output is high,transducer adjust speed,collect temperature-control signals and prevent the screw from cold starting
	Speed reducer	hard-teeth, low noise and wear-resistant speed reducer
	Machine barrel screw	Ø70mm,L/D=24, 38CrMoALA high quality nitriding steel
	Plasticizing	85Kg/H(HDPE)
	Heating zone	4 zone
	Heating power	16KW/H
	Extrude motor power	three phase a synchronism(380V.50HZ)
	cooling fanner	4 zone         power:85W
Extrusion system	Specification	Patented central material feeding mold head that is quick in changing colors
	Die head	40Cr high quality nitriding steel
	Structure of die head	Shan Tou
	Mold center distance	--
	Max diameter of die heat	Ø145mm
	Heating zone	4 zone
	Heating power	16KW
Opening and clamping mold	Specification	Gear wheel and rack in-phase aim at twin  shaft clamping device and cylinder
	clamping force	105KN
	Distance of mold platen	188-538mm
	mold platen dimension	WXH:338x450mm
	Max mold dimension	WXHX:450x500
	mold fix mode	bolt compaction
Electric control system	Specification	PLC.colo.touch screen,standardization  blowing shaping machine control system (MITSUBISHI programmable controller)
	human-machine	color touch screen,trouble auto alarm, diagnose the system
	Temperature control	self-regulation
	Temperature control	adopt Japanese Mitsubishi PLC control system
	protection function	Automatic alert and breakdown feedback double protection of mechanical apparatus
Hydraulic system	Specification	proportion pressure controller changing direction quickly and softly
	human-machine electromotor	three phase a synchronism (380V,50HZ),11KW
	Hydraulic pump	adopt double-lamina pump
	Hydraulic valve	imported hydraulic components
	Vitta	high pressureVitta
	system pressure	60Kg/cm²
	cooling mode	Water-cooled
Pneumatic system	Specification	imported and famous brand pneumatic pressure
	Air pressure	0.6Mpa
	Air	0.7M 3 /min
	Valve	FESTO
Cooling system	Specification	mold,barrel,oil box adopt independentcooling waterway
	cooling medium	water
	Water flux	60L/min
	Water pressure	0.3MPa