Automatic Plastic Bottle Production Line
|FOB Price:||US $30,000 / Piece|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $30,000/ Piece|
|Production Capacity:||10sets Per Month|
|Transport Package:||Standard Export Packing|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: KM-A4
- Raw Material: PET
- Automation: Automatic
- Certification: CE, SGS
- Max Volume: 2L
- After Sale Service: Engineers Available to Service Overseas
- Specification: CE Certificate/ ISO9000: 9001
- HS Code: 8477
- Type: Extrusion Blow Molding Machine
- Making Method of Parison: Stretch Blow
- Computerized: Computerized
- Capacity: 3500bph for 500ml
- Warranty: 12months
- Trademark: KING MACHINE
- Origin: China
1. Capacity: 3500 pcs/hr for 500ml; 3000 pcs/hr for 1000ml; 2400pcs/hr for 1500ml; 2000pcs/hr for 2000ml
2. Max volume of product: 2 liter
3. Total power: 70 kw
1. Full automatic machine
2. Use for PET plastic bottle in all shapes.
3. Controlled by PLC
4. CE, ISO, SGS approved
KM-A4 Automatic Plastic Bottle Production Line / Making Machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmosphere pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: Automatic and manual.
10). Safe, reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost, high efficiency, easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install, test and start up.
14). Low rejection rate: Less than 0.2 percent.
|Productivity||Depend on bottle design||3200-4000PCS/H|
|Product type||Body diameter||20mm-100mm|
|Main machine||Electrical source power||380v 3Phase /220v 3Phase 50/60HZ|
|Really use power||14kw|
|Dimension of main machine||3600*1630*2050mm|
|Weight of main machine||2600kg|
|Air source||LP air compressor||1.6m3/min 1.0MPa 1set (15KW)|
|HP air compressor||1.0m3/min 3.0MPa 2sets (each set 11KW)|
|Air dryer||2.0m3/min 3.0MPa 1set|
|Cooling water||Cooling water||15L/min|
|Auxiliary equipment(preform unscrambler)||L*W*H||2000*950*2480mm|
|Electric part||PLC||LG Mitsubishi|
|Operating system||LG /HITECH|
|Infrared thermometer||America raytek|
|Note||All of the electrical components adopts CE\UL\CCC approved international advanced high-tech product.|